Connect a Yealink cordless phone to a base station

To connect a Yealink cordless phone to its base station, follow these steps:

1. Power on the Base Station:
   
   • Plug the power adapter into the base station and connect it to an electrical outlet.
   • Connect the base station to your network using an Ethernet cable, if necessary.
2. Charge the Handset:
   
   • Insert the battery into the handset and place it on the charging cradle. Allow it to charge fully before proceeding.
3. Register the Handset to the Base Station:
   
   • On the handset, press the "OK" or "Menu" button to access the main menu.
   • Navigate to the "Settings" or "Registration" menu.
   • Select "Register Handset" or "Register" and press "OK."
4. Enter Base Station Registration Mode:
   
   • On the base station, press and hold the "Paging" button (often located on the side or back of the base station) until the LED indicator starts flashing. This puts the base station into registration mode.
5. Complete the Registration:
   
   • On the handset, select the base station to connect to (if prompted).
   • Enter the PIN code for the base station (default is usually "0000") and press "OK."
   • Wait for the handset to complete the registration process. You should see a confirmation message on the handset once registration is successful.
6. Test the Connection:
   
   • Make a test call to ensure the handset is properly connected to the base station.

If you encounter any issues, consult the user manual for your specific Yealink model for detailed instructions or troubleshooting steps.